3fvape.com Mods, Atomizers & Vaping Accessories Updates

3FVape
Użytkownik
Użytkownik
Posty: 1384
Rejestracja: sob kwie 25, 2020 10:10 am
Lokalizacja: Tokyo
Podziękował: 5 razy
Otrzymał podzięk.: 188 razy
Płeć: Mężczyzna

3fvape.com Mods, Atomizers & Vaping Accessories Updates

Postautor: 3FVape » czw lip 30, 2020 1:35 am

Original Crested Ibis MODS Vape Semi-Mech Mechanical Mod with MOSFET $89.00
The Original Crested Ibis MODS Mod is made from Delrin and Stainless Steel. The mod is built-in MOSFET with low / high resistance, overheating, short circuit, reverse polarity protection. The Mod supports 22mm diameter atomizer.
Obrazek
Original Augvape DRUGA 2 BF RDA $29.99
The Original Augvape DRUGA 2 24mm RDA, featuring revised Clamp Snag System build deck bundled in a visually striking aesthetic. Constructed from superior 304 Stainless steel, the chassis is well constructed and visually striking. Implemented within the build deck is an upgraded clamp snag system to maintain ease of building, accommodating a single or dual coil configuration. In addition, the top cap features a dual sided airflow control, offering control over airflow intake. At the bottom is a threaded 510 connection to facilitate connectivity through a swappable gold plated pin or bottom feeder squonk pin, allowing e-Juice to travel through the bottom from your favorite squonk mod
Obrazek
Original Vapor Storm FLAME 25W 1100mAh Pod System Kit $12.99
The Original Vapor Storm FLAME 25W Pod System Vape Starter Kit is built-in 1100mAh battery, and constructed from aluminum alloy and PCTG, lightweight to easily carry, Comes with two kinds coil, 0.6ohm and 1.2ohm mesh coil, one of Flame kit advantage is that you can freely switch from DTL TO MTL.
Obrazek
3FVape
Użytkownik
Użytkownik
Posty: 1384
Rejestracja: sob kwie 25, 2020 10:10 am
Lokalizacja: Tokyo
Podziękował: 5 razy
Otrzymał podzięk.: 188 razy
Płeć: Mężczyzna

3fvape.com Mods, Atomizers & Vaping Accessories Updates

Postautor: 3FVape » śr lip 29, 2020 1:52 am

Original Timesvape Dreamer V1.5 Hybrid Mechanical Mech Vape Mod original price $74.99, now only $56.99
The Timesvape Dreamer V1.5 Mechanical Mod is constructed from stainless steel material. Dreamer V1.5 is powered by 1 x 18650 / 20700 / 21700 Batteries (Not included). The tube itself is 27mm at its widest point, tapering to 25mm at the top. The tube is reversible, so you can customize the grip to suit your preferences. The copper contact pin is also silver-plated for a perfect connection every time.
Obrazek
El Thunder MTLite Mechanical Mod Clone $14.99
The El Thunder MTLite Mechanical Mod Clone is constructed from brass and powered by 1 x 18350 / 18650 battery (not included). The Electric pole is made from brass with silver-plating.
Obrazek
3FVape
Użytkownik
Użytkownik
Posty: 1384
Rejestracja: sob kwie 25, 2020 10:10 am
Lokalizacja: Tokyo
Podziękował: 5 razy
Otrzymał podzięk.: 188 razy
Płeć: Mężczyzna

3fvape.com Mods, Atomizers & Vaping Accessories Updates

Postautor: 3FVape » wt lip 28, 2020 1:47 am

Original Innokin Sceptre 1400mAh Pod System Kit $26.99
The Original Innokin Sceptre pod system vape starter kit is a 1400mAh built in battery device suited for new vapers looking for a small yet compact device. With two coils to choose from, a 1.2ohm for MTL Vaping and a 0.5ohm RDL Coil for high wattages, the Sceptre can easily identify between the two and automatically adjust your settings for the ultimate vaping experience. With an auto draw and button operation the Sceptre also features Boost Mode which can create more heat and vapor. Rechargeable via the micro USB port the also Secptre features a 3.0ml refillable pods that are easily replaceable with Innokin's latest Sceptre coils. Simply twist the bottom of the pod to remove and replace the coils.
Obrazek
Original Artery NUGGET+ 70W 2000mAh VW Pod System Kit original price $53.90, now only $31.99
The Original Artery NUGGET+ 70W VW Pod System Vape Mod Kit is made of PC and PCTG with super light and pocket size. Artery NUGGET+ Pod Mod Kit is built-in 2000mAh battery with max 70W output. Artery NUGGET+ Pod Mod 70W Kit features AERO chip with constant wattage and 0.96 inch color screen to show vaping data clearly. Artery NUGGET+ cartridge comes with 5.0ml capacity with top filling design and Brand new XP core series: 0.15ohm coil, 0.4ohm coil and RBA coil (not included). Artery HP pod is compatible with HP cores series. Artery NUGGET+ can adjust airflow by airflow reduction silicon part and turn to a box mod by 510 adapter (not included).
Obrazek
3FVape
Użytkownik
Użytkownik
Posty: 1384
Rejestracja: sob kwie 25, 2020 10:10 am
Lokalizacja: Tokyo
Podziękował: 5 razy
Otrzymał podzięk.: 188 razy
Płeć: Mężczyzna

Re: 3fvape.com Mods, Atomizers & Vaping Accessories Updates

Postautor: 3FVape » pn lip 27, 2020 3:37 am

Original Vapeasy dotEasy Replacement Pod Tank for dotMod dotAIO Pod System - Translucent Blue $5.99
The Original Vapeasy dotEasy Replacement Pod Tank is made from acrylic with 2.0ml and it is suitable for dotMod dotAIO Pod System.
Obrazek
original Vapeasy dotEasy Replacement Pod Tank for dotMod dotAIO Pod System - Translucent Green $5.99
The Original Vapeasy dotEasy Replacement Pod Tank is made from acrylic with 2.0ml and it is suitable for dotMod dotAIO Pod System.
Obrazek
3FVape
Użytkownik
Użytkownik
Posty: 1384
Rejestracja: sob kwie 25, 2020 10:10 am
Lokalizacja: Tokyo
Podziękował: 5 razy
Otrzymał podzięk.: 188 razy
Płeć: Mężczyzna

3fvape.com Mods, Atomizers & Vaping Accessories Updates

Postautor: 3FVape » pn lip 27, 2020 3:37 am

Original Vapeasy dotEasy MTL RBA Coil Deck with Tank + 4 Air Pin Inserts for dotMod dotAIO Pod System original price $30.99, now only $24.99
The Original Vapeasy dotEasy MTL RBA Coil Deck is made from stainless steel with bottom airflow adjustable for MTL Vaping. This MTL RBA is with dual-side airflow control, each side with 4 air holes: 1.5mm / 1.5mm / 1.2mm / 0.9mm. Combining with 4 Air Pin Inserts: 1.8mm / 1.5mm / 1.3mm / 0.9mm, you will get excellent MTL vaping experience. The Authentic Vapeasy dotEasy MTL RBA Coil Deck is with single coil building deck, dual-pole design for very easy coil building. The airflow will reach the coil directly from the bottom. What's more, the RBA deck is very convenient to take out for building, without taking out the top cap and chimney. Just take out the RBA deck, build the coil, plug the deck back, Very convenient. The deck is with 510 threading connection, take off the airflow ring, and then you can install the deck on resistance tester or mod to test the resistance of the coil. The Vapeasy dotEasy MTL RBA Coil Deck is perfect to match your dotMod dotAIO Pod System to get MTL Vaping experience.
Obrazek
Original Vapeasy dotEasy Replacement Pod Tank for dotMod dotAIO Pod System - Transparent $5.99
The Original Vapeasy dotEasy Replacement Pod Tank is made from acrylic with 2.0ml and it is suitable for dotMod dotAIO Pod System.
Obrazek
Original Vapeasy dotEasy Replacement Pod Tank for dotMod dotAIO Pod System - Translucent Red $5.99
The Original Vapeasy dotEasy Replacement Pod Tank is made from acrylic with 2.0ml and it is suitable for dotMod dotAIO Pod System.
Obrazek
3FVape
Użytkownik
Użytkownik
Posty: 1384
Rejestracja: sob kwie 25, 2020 10:10 am
Lokalizacja: Tokyo
Podziękował: 5 razy
Otrzymał podzięk.: 188 razy
Płeć: Mężczyzna

3fvape.com Mods, Atomizers & Vaping Accessories Updates

Postautor: 3FVape » pn lip 27, 2020 1:57 am

Original Hugo Vapor Rader ECO 200W VV VW Box Mod $25.99
The Hugo Vapor Rader Eco Mod, powered by dual 18650 batteries (Not included) with 200W max output, is the newly designed box mod from Hugo Vapor. The Rader Eco supports Variable Voltage, Variable Wattage, Bypass and Curve Heating output Mode. Equipped with the 0.96inch OLED screen, the Hugo Vapor Rader Eco Mod will bring you great vaping experience.
Obrazek
Original VEIIK Dynam 1100mAh Pod System Kit $20.29
The Original VEIIK Dynam Pod System Vape Starter Kit is built-in 1100mAh. The pod cartridge is with 2.0ml capacity and 1.2ohm coil.
Obrazek
3FVape
Użytkownik
Użytkownik
Posty: 1384
Rejestracja: sob kwie 25, 2020 10:10 am
Lokalizacja: Tokyo
Podziękował: 5 razy
Otrzymał podzięk.: 188 razy
Płeć: Mężczyzna

3fvape.com Mods, Atomizers & Vaping Accessories Updates

Postautor: 3FVape » sob lip 25, 2020 2:07 am

El Thunder MTLite Mechanical Mod Clone(Replica) $14.99
The El Thunder MTLite Vape Mechanical Mod Clone is constructed from brass and powered by 1 x 18350 / 18650 battery (not included). The Electric pole is made from brass with silver-plating.
Obrazek
Original DOVPO Odin 100 100W TC VW Box Mod $79.99
The Odin 100 VW Vape box Mod is a new members of Odin series, it's also collaboration with Vaping Bogan, Vaperz Cloud and Dovpo. This Odin 100 is equipped with the advanced Dovpo Chip to bring you better battery life, an intelligent interface and up to 100w of power. Supported by USB Type-C makes your Odin 100 charging easier and faster. Compact Design and compatible with single 18650 / 20700 / 21700 battery (not included), supporting your whole-day using and portable carrying to anywhere for the Odin 100.
Obrazek
Original Hcigar VT INPOD 40W 1500mAh VW Pod System Kit original price $36.99, now only $24.99
The Original Hcigar VT INPOD 40W Pod Vape Kit is constructed of Zinc alloy & PCTG with line design and smooth appearance for good hand feeling. Hcigar VT INPOD Pod Kit is powered by 1500mAh built-in polymer battery. Hcigar VT INPOD features Towis chipset of Hcigar and adjustable output wattage of 5~40W. Hcigar VT INPOD pod cartridge maintains 0.3ohm Honeycomb mesh heating coil and 4.5ml capacity with top filling design to prevent leakage. Hcigar VT INPOD pod adopts bottom intake for more soft and delicate vaping.
Obrazek
3FVape
Użytkownik
Użytkownik
Posty: 1384
Rejestracja: sob kwie 25, 2020 10:10 am
Lokalizacja: Tokyo
Podziękował: 5 razy
Otrzymał podzięk.: 188 razy
Płeć: Mężczyzna

3fvape.com Mods, Atomizers & Vaping Accessories Updates

Postautor: 3FVape » pt lip 24, 2020 9:10 am

3FVape pisze:Vapeasy Stealth Project Elite 70W TC VW Box Mod Clone(Replica)$59.99
The Vapeasy Stealth Project Elite Vape Box Mod Clone is constructed from POM and Stainless Steel material. The Vapeasy Stealth Project Elite Vape Box Mod Clone is compatible with 25mm max atomizer diameter. (Not included, sold separately). The mod is built-in 70W chipset and supports wattage adjustable from 5W to 70W, temperature control (200~600'F / 100~300'C). Only one batch, limited quantity.
Obrazek
Original FreeMax Fireluke 22 Sub Ohm Tank Vape Atomizer Clearomizer $29.99
The Original Fireluke 22 Tank utilizes FreeMax COILTECH 4.0 with SS904L Mesh and Tea Fiber Cotton formula. With 0.5ohm DTL Mesh Coil and 1.0ohm & 1.5ohm MTL Mesh Coil, its compatible with both freebase as well as salt nicotine e-liquids for both DTL and MTL vaping needs. The child-proof top fill design and leak-proof mechanism is also added to the tank for convenience and safety. The FreeMax Fireluke 22 Tank is 22mm in diameter. The FreeMax Fireluke 22 Tank comes with bulb 3.5ml capacity and straight 2ml juice storage for selection. The FreeMax Fireluke 22 Tank adopts child-proof top fill design for easy refill. The leak-proof mechanism ensures a convenient vape too.
Obrazek
Original Suorin AIR UL 16W 400mAh Pod System Kit $24.99
The Original Suorin AIR UL Pod system vape Kit is a new all-in-one device with a modern mode. It comes with a 400mAh battery and 2.0ml cartridge. The Suorin AIR UL features on-off switch, indicator light and refilling design. It is a good choice for you to carry anywhere and everywhere.
Obrazek
3FVape
Użytkownik
Użytkownik
Posty: 1384
Rejestracja: sob kwie 25, 2020 10:10 am
Lokalizacja: Tokyo
Podziękował: 5 razy
Otrzymał podzięk.: 188 razy
Płeć: Mężczyzna

3fvape.com Mods, Atomizers & Vaping Accessories Updates

Postautor: 3FVape » pt lip 24, 2020 2:12 am

Vapeasy Stealth Project Elite 70W TC VW Box Mod Clone(Replica) $59.99
The Vapeasy Stealth Project Elite Vape Box Mod Clone is constructed from POM and Stainless Steel material. The Vapeasy Stealth Project Elite Vape Box Mod Clone is compatible with 25mm max atomizer diameter. (Not included, sold separately). The mod is built-in 70W chipset and supports wattage adjustable from 5W to 70W, temperature control (200~600'F / 100~300'C). Only one batch, limited quantity.
Obrazek
Original FreeMax Fireluke 22 Sub Ohm Tank Vape Atomizer Clearomizer $29.99
The Original Fireluke 22 Tank utilizes FreeMax COILTECH 4.0 with SS904L Mesh and Tea Fiber Cotton formula. With 0.5ohm DTL Mesh Coil and 1.0ohm & 1.5ohm MTL Mesh Coil, its compatible with both freebase as well as salt nicotine e-liquids for both DTL and MTL vaping needs. The child-proof top fill design and leak-proof mechanism is also added to the tank for convenience and safety. The FreeMax Fireluke 22 Tank is 22mm in diameter. The FreeMax Fireluke 22 Tank comes with bulb 3.5ml capacity and straight 2ml juice storage for selection. The FreeMax Fireluke 22 Tank adopts child-proof top fill design for easy refill. The leak-proof mechanism ensures a convenient vape too.
Obrazek
Original Suorin AIR UL 16W 400mAh Pod System Kit $24.99
The Original Suorin AIR UL Pod system vape Kit is a new all-in-one device with a modern mode. It comes with a 400mAh battery and 2.0ml cartridge. The Suorin AIR UL features on-off switch, indicator light and refilling design. It is a good choice for you to carry anywhere and everywhere.
Obrazek
3FVape
Użytkownik
Użytkownik
Posty: 1384
Rejestracja: sob kwie 25, 2020 10:10 am
Lokalizacja: Tokyo
Podziękował: 5 razy
Otrzymał podzięk.: 188 razy
Płeć: Mężczyzna

3fvape.com Mods, Atomizers & Vaping Accessories Updates

Postautor: 3FVape » czw lip 23, 2020 7:40 am

3FVape pisze:Original asMODus Anani V2 MTL RTA original price $30.99, now only $25.99
The Original asMODus ANANI V2 MTL RTA, a single coil rebuildable tank vape atomizer geared for nicotine salt, it comes with 2.0ml e-juice capacity PEI tank, top filling system design and threaded airflow diffuser. Made of stainless steel, this MTL tank is more impact-resistant. the Anani V2 RTA is an MTL tank made take full advantage of your regulated devices that have been shelved. Under the build deck is a large juice reservoir that allows the juice to flow effortlessly to the 2 bored out holes on the build deck. Forged of stainless steel alongside with ultem, the Anani V2 MTL RTA has more impact-resistant build for us clumsy vapors.
Obrazek
Original YDDZ T1 MTL RTA $22.99
The YDDZ T1 MTL RTA is constructed from Stainless Steel (body), PC Tube (Pre-installed), Glass Tube (Spare), and PC Drip Tip in 16mm Diameter. The tank tube features 2ml E-juice capacity. The YDDZ T1 MTL RTA comes with a Single Coil Build Deck with Dual Side Posts, which supports Top Refilling System and Dual Bottom Airflow Adjustments.
Obrazek

Wróć do „3FVape w Salonie”

Kto jest online

Użytkownicy przeglądający to forum: Claude [Bot] i 2 gości